Pvc Hose For Water

No products found.

Use fewer filters or clear filters.


Pvc Hose For Water

PVC hose for water, durable for various water transfer applications in industrial use.

What is blue braided PVC hose?

Soft PVC tube with polyester yarn braid reinforcement, in blue. Built to BS6066, rated 4-10 bar depending on bore over -10C to +65C, available in 10mm and 13mm internal diameter, cut from 1 metre up to a 100 metre full coil.

Why blue specifically?

Blue is the conventional identification colour for clean water and compressed air in a lot of industrial and workshop practice, which makes it a sensible default where several services run alongside each other. It also blocks light, so algae will not grow inside it the way it does in clear hose.

Is the specification the same as clear?

Yes - same BS6066 construction, same polyester braid reinforcement, same 4-10 bar rating and -10C to +65C temperature range. The colour is pigment in the PVC and makes no difference to performance. You lose the ability to see flow through the wall.

Can I use it on a suction line?

No. The braid provides pressure strength but no collapse resistance, so any real negative pressure will draw it shut. For suction you need a hose with a steel helix - our PVC wire reinforced hose covers 10mm to 51mm and is designed for that duty.

What can I use it for?

Water, air and light fluid transfer - garden and irrigation, pump work, low-pressure workshop air, general industrial and commercial use. Not for fuel, oil or anything hot: PVC tops out at +65C and has no hydrocarbon resistance at all.

What sizes and lengths do you stock?

10mm and 13mm internal diameter, cut to order from 1 metre up to a 100 metre coil. A full coil is considerably better value per metre if you have a long run or several hoses to make up. Order by internal diameter to match your barb or spigot.