Kunststoff-Luftschlauch

5 Produkte


Kunststoff-Luftschlauch

Diese mit Präzisionstechnik gefertigte Kollektion bietet eine Reihe von Luftkanälen, die sorgfältig dafür entwickelt wurden, die Luftstromsteuerung für verschiedene Anwendungen zu optimieren.

Von Industrieanlagen und Gewerbeflächen bis hin zu Wohnbereichen bietet unsere Luftkanalkollektion vielseitige Lösungen. Egal, ob Sie ein neues Belüftungssystem bauen oder ein vorhandenes aufrüsten, diese Kanäle passen sich nahtlos an Ihre individuellen Luftstromanforderungen an.

Wir bieten eine große Auswahl an Größen und Konfigurationen für unterschiedliche Luftstromanforderungen. Mit unserer großen Auswahl finden Sie ganz einfach den perfekten Kanal für Ihr Projekt, egal ob es sich um eine groß angelegte Industrieanwendung oder ein eher fokussiertes System für Wohngebäude handelt.

Unsere Luftkanallösungen werden strengen Tests unterzogen, um sicherzustellen, dass sie den höchsten Qualitäts- und Leistungsstandards entsprechen. Ob Sie ein professioneller Ingenieur sind, der nach zuverlässigen Luftstromkomponenten sucht, oder ein Hausbesitzer, der die Luftqualität in seinem Zuhause verbessern möchte, unsere Kollektion verkörpert Zuverlässigkeit und Innovation.

Which ducting do I need?

It comes down to temperature and what is passing through. Silicone air ducting for hot air, -70C to +310C. Aluminium semi-flexible for HVAC and moderate heat, -30C to +150C. Polyurethane for abrasive dust and material handling, -40C to +90C. PVC corrugated for clean air, -10C to +65C.

What sizes do you stock?

Silicone ducting 25mm to 200mm in 1 to 4 metre lengths; polyurethane 38mm to 300mm in 1 to 20 metre lengths; aluminium semi-flexible in 76mm, 102mm, 125mm and 150mm in 2 and 4 metre lengths. There are also complete 5 and 9 metre dual exhaust extraction ventilation ducting kits.

What are the exhaust extraction kits?

Complete dual-outlet ventilation ducting kits in 5 and 9 metre lengths, built around silicone glass fibre ducting so they handle genuinely hot exhaust gas. They are aimed at workshops and garages venting engine exhaust out of the building - the material is the important part, since PVC would not survive it.

Can these be used on the suction side of a fan?

Yes - the silicone, polyurethane and PVC ducting all have a wire helix in the wall so they hold their bore under negative pressure, and aluminium semi-flexible is self-supporting. That is the fundamental difference between ducting and plain flexible hose, which collapses the moment you pull a vacuum on it.

Which is best for dust extraction?

Polyurethane, if the dust is at all abrasive. Wood chips, grit and grain wear straight through PVC at the bends within a season, whereas polyurethane is made for it. For fine non-abrasive dust or fume, PVC corrugated is cheaper and adequate. Earth the helix properly if the dust is combustible.

How do I join and cut ducting?

Cut the wall between the helix coils with a sharp knife, then cut the wire with side cutters and tape or dress the cut end so it cannot work through the wall. Join with a duct connector sized to the bore - we stock ABS male and reducing connectors for PU ducting in 50mm to 200mm.